Technical Data Sheet

Water-based Glass Baking Paint

Water-based Glass Coating · Category: Glass paint

Water-based glass coating providing transparent or translucent protection for architectural and automotive glass surfaces. Excellent UV resistance, anti-graffiti properties, and ease of cleaning.

Key Features

Transparent, does not alter glass appearance UV resistant, anti-yellowing Water-based, environmentally friendly Easy to apply, spray or wipe Anti-graffiti and easy-clean surface

Typical Applications

Architectural glass
Display cases
Solar panels
Automotive glass
Mirrors

Technical Specifications

Type
Water-based acrylic/silica hybrid
Color
Transparent / Translucent
Solid content≥ 25%
Dry to touch≤ 30 min @ 25°C
Full cure7 daysUV resistance≥ 1000h QUV
Hardness≥ 3H (pencil)VOC< 50 g/L
Coverage10-15 m²/kg per coat

Application Notes

Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point.

Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C.

Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film t