Technical Data Sheet ## Water-borne motorcycle parts metal paint Water-based Accessory Coating · Category: Motorcycle accessories High-gloss water-based coating for motorcycle and accessory parts. Excellent weathering resistance, color retention, and mechanical properties for high-end appearance and durability. ## Key Features High gloss and mirror finish Excellent weathering and UV resistance Strong adhesion on metal and plastic Water-based, low VOC Resistant to gasoline, oil, and brake fluid ## Typical Applications Motorcycle framesFuel tanksHelmetsWheelsAccessory parts ## Technical Specifications TypeWater-based acrylic polyurethaneColorCustom color matchingGloss≥ 90 @ 60°Solid content≥ 50%Hardness≥ H (pencil)AdhesionGrade 0VOC< 80 g/LCoverage8-12 m²/kg @ 30μm DFT ## Application Notes Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point. Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C. Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging. ## Storage & Safety