Technical Data Sheet

301(orange, red, white)water-based corrosion-proof coating with primer and topcoat

Water-based Anti-corrosion Coating · Category: Telecommunication tower

Single-component or two-component water-based anti-corrosion coating for steel structures, offering balanced protection and ease of application. Ideal for medium-corrosion environments and projects requiring fast turnaround.

Key Features

240-500 hours salt spray resistance Direct-to-metal application possible Water-based, low VOC, environmentally friendly Fast dry, excellent early water resistance Good flexibility and impact resistance

Typical Applications

Steel structures
Machinery housings
Fencing
Containers
General industrial

Technical Specifications

Type
Water-based acrylic/epoxy hybrid
Color
Custom colors available
Solid content≥ 50%
Dry to touch≤ 30 min @ 25°C
Recoat time≥ 2 hours
Salt spray≥ 240h
Adhesion
Grade 1VOC< 60 g/L
Coverage8-10 m²/kg @ 40μm DFT

Application Notes

Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point.

Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C.

Application: Airless spray is recommended for best results. Brush or roll