Technical Data Sheet ## Waterborne iron red antirust primer Water-based Anti-corrosion Coating · Category: Oil tank Single-component or two-component water-based anti-corrosion coating for steel structures, offering balanced protection and ease of application. Ideal for medium-corrosion environments and projects requiring fast turnaround. ## Key Features 240-500 hours salt spray resistance Direct-to-metal application possible Water-based, low VOC, environmentally friendly Fast dry, excellent early water resistance Good flexibility and impact resistance ## Typical Applications Steel structuresMachinery housingsFencingContainersGeneral industrial ## Technical Specifications TypeWater-based acrylic/epoxy hybridColorCustom colors availableSolid content≥ 50%Dry to touch≤ 30 min @ 25°CRecoat time≥ 2 hoursSalt spray≥ 240hAdhesionGrade 1VOC< 60 g/LCoverage8-10 m²/kg @ 40μm DFT ## Application Notes Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point. Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C. Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet c